Emergency Door Release Systems
Internal and external emergency release solutions for electric passenger vehicle door systems.
TLG SYSTEMS develops and supplies mechanical emergency release solutions for bus, minibus, midibus and commercial passenger vehicle doors. Each system is configured according to the door mechanism, vehicle body, installation position, accessibility requirements and emergency operating concept.
Manual emergency access when normal door operation is unavailable
Emergency release components provide a mechanical method of releasing or disengaging the door system when electrical operation is unavailable or an emergency evacuation is required.
Release components can be installed inside and outside the vehicle according to the application.
Manual mechanical operation independent of the normal electric opening command.
Connection architecture can be configured according to the mechanism and installation geometry.
Mounting, orientation and operating direction are selected for the vehicle and door system.
Configurable emergency release hardware
The final supply scope is determined according to the door mechanism, vehicle body and required emergency access points.
Internal Emergency Handle
Passenger-compartment release component positioned for accessible manual operation during an emergency.
External Emergency Handle
Exterior release solution supporting emergency access to the vehicle from outside.
Mechanical Connection
Cable, rod or linkage-based connection between the emergency operating component and door mechanism.
Mechanism Release Interface
Mechanical interface developed to release or disengage the applicable locking and actuation arrangement.
Mounting Components
Brackets, pivots and installation hardware adapted to the vehicle body and available packaging space.
Warning Signal Support
Emergency operation status can be combined with a switch or signal input according to the selected control architecture.
A direct mechanical path to release the door
The system is designed to provide understandable and practical manual operation while remaining compatible with the normal electric door function.
Emergency Handle Operation
The internal or external emergency control is manually operated by the user.
Mechanical Force Transmission
The cable, rod or linkage transmits movement to the release interface.
Door System Release
The applicable locking or actuation interface is mechanically released.
Manual Door Movement
The door can be moved manually according to the mechanism and vehicle configuration.
System Reset
After inspection, the emergency release is returned to its normal operating position according to the system procedure.
Emergency release solutions for different door architectures
Component geometry and connection structure are adapted according to the selected door system.
Information required for system configuration
Emergency release hardware must be selected together with the complete door mechanism and vehicle installation.
- Vehicle type and target market
- Door type and opening architecture
- Door mechanism and actuator configuration
- Internal and external mounting positions
- Available cable or rod routing area
- Vehicle body and trim clearances
- Required warning switch or signal interface
- Applicable regulatory and project requirements
Emergency release location, accessibility, operating direction, marking and final installation must be evaluated according to the complete vehicle, applicable regulatory requirements and approval strategy. TLG SYSTEMS provides component and engineering preparation support; final approval is performed by the relevant authorized organization.
Need an emergency release solution for your door system?
Contact TLG SYSTEMS for internal and external emergency release components, mechanism compatibility and vehicle-specific integration support.