12V DC / 24V DC Electric Door Motor
TLG SYSTEMS universal electric motor is developed for 12V DC and 24V DC electric door system applications. It is designed for reliable operation, long service life and smooth movement control in bus, minibus and commercial passenger vehicle door systems.
Compact electric motor for professional door system applications.
Designed as a 12V DC / 24V DC motor platform for electric door mechanisms requiring durability, smooth movement and reliable performance under repeated operating cycles.
Renewed and improved motor solution for electric door systems.
The motor is positioned for vehicle door systems where controlled movement, endurance and low-noise operation are required. It can be used as part of complete TLG SYSTEMS door solutions or evaluated as a motor component for customer-specific mechanism projects.
- 12V DC and 24V DC motor options
- 120 W rated power
- 60 ± 10 rpm no-load speed
- Stall torque value of ≥18 Nm
- IP54 protection class
- Designed for smooth operation and long service life
Designed for durability, reliable operation and repeatable performance.
The motor supports electric door applications where service life, controlled movement and consistent performance are important for bus, minibus and commercial passenger vehicle projects.
Renewed & Improved
Renewed motor configuration developed to improve performance, efficiency and durability in electric door system applications.
+17% Performance Improvement
Improved performance compared with the previous configuration, supporting stronger and more stable door movement behaviour.
Tested & Reliable
Endurance-tested for up to 1,000,000 cycles under real operating conditions for long-life door system performance.
Smooth Operation
Developed for high-efficiency and low-noise operation in electric door opening and closing movement.
High Durability
Designed for long service life in repetitive vehicle door operation and demanding passenger transport use.
Quality Tested
Each motor can be checked before delivery according to the required project and quality control process.
12V DC and 24V DC motor technical data.
The following specification is used for the universal electric motor platform. Final integration must be confirmed according to door mechanism, vehicle voltage, control unit configuration and project requirement.
| Parameter | 12V DC | 24V DC |
|---|---|---|
| Operating Voltage | 9–16 VDC | 17–30 VDC |
| Rated Power | 120 W | 120 W |
| No Load Speed | 60 ± 10 rpm | 60 ± 10 rpm |
| Stall Torque | ≥18 Nm | ≥18 Nm |
| Operating Temperature | −30°C / +85°C | −30°C / +85°C |
| Protection Class | IP54 | IP54 |
| Endurance Test | 1,000,000 cycles | 1,000,000 cycles |
Motor platform for different electric door system configurations.
The motor can be evaluated for different electric door applications depending on mechanism layout, required torque, door movement strategy and vehicle electrical architecture.
- Single-leaf electric door systems
- Double-leaf electric door systems
- Sliding door system applications
- 12V DC vehicle electrical architectures
- 24V DC vehicle electrical architectures
- Customer-specific door mechanism projects
Suitable for bus, minibus and commercial passenger vehicle door projects.
The motor is intended for professional vehicle access systems where controlled movement, durability and electric operation are required.
Vehicle Platforms
- Bus applications
- Minibus applications
- Midi bus projects
- Commercial passenger vehicles
- Special vehicle conversions
Door Mechanisms
- Outward opening single-leaf systems
- Outward opening double-leaf systems
- Electric sliding door systems
- Customer-specific mechanical linkages
- Project-based actuator integration
Performance Focus
- Long-life operation
- Low-noise movement
- High efficiency
- Repeatable door movement
- Quality control before delivery
Developed for repeated door operation and long service life.
Electric door motors operate under repetitive cycles, changing loads and vehicle voltage conditions. For this reason, motor performance must be evaluated together with the mechanism, control unit and complete vehicle door installation.
- Endurance test target up to 1,000,000 cycles
- Designed for long service life
- High-efficiency movement behaviour
- Smooth and low-noise operation
- Inspection and quality control before delivery
- Project-specific technical support for integration
Need a 12V / 24V electric motor for your door system?
Contact TLG SYSTEMS for motor selection, door mechanism compatibility, control unit matching, operating speed requirements and project-specific technical support.